CHECK POINT S-30 SECURITY MANAGEMENT APPLIANCE SMART-1 50 CYBER-SECURITY 4*1TB
TESTING & COSMETIC NOTES:
https://www.ocdepot.com/template/spacer.gifThis is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
The unit has been reset to the factory default settings. See console log below. Hard drives has been erased and vigorously tested to have all good sectors. There is no information or data on the drives.
COMPONENTS INCLUDED IN THIS AUCTION:
https://www.ocdepot.com/template/spacer.gif
• (1) – CHECK POINT S-30 SECURITY MANAGEMENT APPLIANCE SMART-1 50 CYBER-SECURITY HSS
• (4) – WESTERN DIGITAL RE3 WD1002FBYS 1TB 7200 RPM 32MB CACHE SATA 3.0GB/S 3.5″ INTERNAL HARD DRIVE BARE DRIVE
• (1) – IG407 V1.2 MANAGEMENT CARD
• (1) – EMACS R2W-6460P-R SERVER RACKMOUNT POWER SUPPLY
• (1) – PAIR OF RACK-MOUNT EARS
• (1) – POWER CORD
REPLACEMENT or MONEY BACK GUARANTEE:
https://www.ocdepot.com/template/spacer.gif
When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:
https://www.ocdepot.com/template/spacer.gif
LSI MegaRAID SAS-MFI BIOS
Version 2.07.00 (Build March 31, 2009)
Copyright(c) 2009 LSI Corporation
HA -0 (Bus 10 Dev 0) MegaRAID SAS 8704ELP
FW package: 11.0.1-0022
Battery Status: Not present
PCI SLOT ID LUN VENDOR PRODUCT REVISION CAPACITY
——– — — —— ——- ——– ——–
41 LSI MegaRAID SAS 8704ELP 1.40.92-0746 128MB
41 19 0 ATA WDC WD1002FBYS-0 0C06 953869MB
41 20 0 ATA WDC WD1002FBYS-0 0C06 953869MB
41 21 0 ATA WDC WD1002FBYS-0 0C06 953869MB
41 22 0 ATA WDC WD1002FBYS-0 0C06 953869MB
41 0 LSI Virtual Drive RAID10 1905440MB
1 Virtual Drive(s) found on the host adapter.
1 Virtual Drive(s) handled by BIOS
Press for WebBIOS or press for Preboot CLI
Starting SMBFS mounts: [ OK ]
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.aRAID SAS 8704ELP
Red Hat nash version 5.1.19.6 starting
stabilized: stat /proc/bus/usb/devices: No such file or directory
Reading all physical volumes. This may take a while…
^[[A^[[A Found volume group “vg_splat” using metadata type lvm2
6 logical volume(s) in volume group “vg_splat” now activeION CAPACITY
INIT: version 2.85 booting ——- ——– ——–
mount: proc already mounted MegaRAID SAS 8704ELP 1.40.92-0746 128MB
Configuring kernel parameters: [ OK ]BYS-0 0C06 953869MB
Setting clock (utc): Mon Dec 17 23:37:51 UTC 2018 [ OK ] 953869MB
Starting udev: [ OK ] WDC WD1002FBYS-0 0C06 953869MB
Setting hostname cpmodule: [ OK ]002FBYS-0 0C06 953869MB
Initializing USB controller (ohci-hcd): [ OK ] RAID10 1905440MB
Initializing USB controller (ehci-hcd): [ OK ]
Initializing USB controller (uhci-hcd): [ OK ]
Your system appears to have shut down uncleanly
Press Y within 5 seconds to force file system integrity check…
Checking root filesystem
[/sbin/fsck.ext3 (1) — /] fsck.ext3 -a /dev/mapper/vg_splat-lv_current
/dev/mapper/vg_splat-lv_current: clean, 15960/6553600 files, 821209/13107200 blo
cks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Setting up Logical Volume Management: [ OK ]
Finding module dependencies: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) — /boot] fsck.ext3 -a /dev/sda1
/boot: recovering journal
/boot: clean, 98/38152 files, 28274/152584 blocks
[/sbin/fsck.ext3 (1) — /var/log] fsck.ext3 -a /dev/mapper/vg_splat-lv_log
/dev/mapper/vg_splat-lv_log: recovering journal
/dev/mapper/vg_splat-lv_log: clean, 84/209715200 files, 6631790/419430400 blocks
[ OK ]
Mounting local filesystems: [ OK ]
Activating swap partitions: [ OK ]
Enabling swap space: [ OK ]
INIT: Entering runlevel: 3
Applying Intel Microcode update: don’t know how to make device “cpu/0/microcode”
/etc/rc3.d/S00microcode_ctl: microcode device /dev/cpu/0/microcode doesn’t exist
?
Checking for new hardware [ OK ]
Updating /etc/fstab [ OK ]
Starting lcdpanel_init: [ OK ]
Starting kdump: [ OK ]
Inserting vpntmod.2.6.18.cp.i686: [ OK ]
Configuring network: [ OK ]
Starting SMBFS mounts: [ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
CPshell initialization: [ OK ]
Initializing random number generator: [ OK ]
Starting acpi daemon: [ OK ]
Starting sshd:[ OK ]
Starting arp: [ OK ]
Starting crond: [ OK ]
Running cp_htp_server_wd: [ OK ]
Running cpwmd_wd: [ OK ]
Starting cpri_d: [ OK ]
Starting cpboot: [ OK ]
Starting cpboot_refetch: [ OK ]
Starting lcdpanel: [ OK ]
Starting led: [ OK ]
Starting mfirstTimeSettings: [ OK ]
Starting ntp: [ OK ]
Check Point SecurePlatform Pro R75
For Web User Interface access connect to htps://192.168.1.1:4434
login:admin
Password:
You must change the default password.
Enter new password: